BS EN 16711-3:2019
$86.31
Textiles. Determination of metal content – Determination of lead release by artificial saliva solution
| Published By | Publication Date | Number of Pages |
| BSI | 2019 | 14 |
This document describes a testing procedure to determine the rate of lead release from all materials of textile articles. NOTE With this test procedure it can be demonstrated that the rate of lead release from such an article or any accessible part of an article, whether coated or uncoated, does or does not exceed 0,05 ?g/cm2 per hour, and, for coated articles, that the coating is sufficient to ensure that this release rate is not exceeded for a period of at least two years of normal or reasonably foreseeable conditions of use of the article (Annex XVII of Regulation (EC) No 1907/2006, column 2 of entry 63 paragraph 7, second clause) [5].
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 2 | National foreword |
| 5 | European foreword |
| 6 | Introduction |
| 7 | 1 Scope 2 Normative references 3 Terms and definitions 4 Principle |
| 8 | 5 Safety precautions 6 Reagents 7 Apparatus and materials |
| 9 | 7.6 Vessels with lids 8 Preparation of test specimens 8.1 Sampling 8.2 Determination of the specimen surface area 8.3 Simulation of wear 8.4 Masking |
| 10 | 8.5 Specimen pre-treatment before testing 9 Procedure 9.1 Extraction 9.2 Determination of lead 9.2.1 Analysis 9.2.2 Calibration solutions 9.2.3 Blank solutions 9.2.4 Number of replicate measurements 10 Calculation and expression of results — Lead release |
| 11 | 11 Test report |
| 12 | Annex A (normative) Requirements for preparation of artificial saliva |
| 13 | Bibliography |
Related products
-
BS EN 16211:2015
Ventilation for buildings. Measurement of air flows on site. Methods Published By Publication Date Number…
-
BS EN 16715:2015
Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate…
-
BS EN 16511:2023
Modular mechanical locked floor coverings (MMF). Specification, requirements and test method for multilayer modular panels…
-
BS EN 16611:2023
Furniture. Assessment of the surface resistance to microscratching Published By Publication Date Number of Pages…
-
BS EN 16511:2014+A1:2019
Loose-laid panels. Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer Published…
-
BS EN 16711-1:2015
Textiles. Determination of metal content – Determination of metals using microwave digestion Published By Publication…
-
BS EN ISO 28721-4:2012:2013 Edition
Vitreous and porcelain enamels. Glass-lined apparatus for process plants – Quality requirements for glass-lined flanged…
-
BS EN ISO 16911-2:2013
Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts…
-
BS EN 16713-3:2016
Domestic swimming pools. Water systems – Water treatment. Requirements Published By Publication Date Number of…
-
BSI 18/30374737 DC:2018 Edition
BS EN 16713-2. Domestic swimming pools. Water systems – Part 2. Circulation systems. Requirements and…
-
BS EN ISO 16911-1:2013
Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts…
-
BS EN 16719:2018
Transport platforms Published By Publication Date Number of Pages BSI 2018 82
-
BSI PD CEN/TS 16611:2016
Furniture. Assessment of the surface resistance to microscratching Published By Publication Date Number of Pages…
-
BS EN 16811-2:2016
Winter service equipment and products. De-icing agents – Calcium chloride and Magnesium chloride. Requirements and…
-
BS EN 16718:2015:2016 Edition
Wood and wood based products. Dosage of the total organic carbon (TOC) in wood and…
-
BS EN 16712-3:2015
Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable foam equipment –…
-
BS EN 1711:2000:2004 Edition
Non-destructive examination of welds. Eddy current examination of welds by complex plane analysis Published By…
-
BS EN 16751:2016
Bio-based products. Sustainability criteria Published By Publication Date Number of Pages BSI 2016 36
-
BS EN 15711:2009
Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements…
-
BS EN 16781:2018
Textile child care articles. Safety requirements and test methods for children’s sleep bags for use…
-
BS EN 16714-3:2016
Non-destructive testing. Thermographic testing – Terms and definitions Published By Publication Date Number of Pages…
-
BS EN 16511:2014
Loose-laid panels. Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer Published…
-
BS EN 50533:2011+A1:2016
Railway applications. Three-phase train line voltage characteristics Published By Publication Date Number of Pages BSI…
-
BS EN 16811-1:2016
Winter service equipment and products. De-icing agents – Sodium chloride. Requirements and test methods Published…
-
BS EN ISO 16811:2014
Non-destructive testing. Ultrasonic testing. Sensitivity and range setting Published By Publication Date Number of Pages…
-
BS EN 16171:2016
Sludge, treated biowaste and soil. Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)…
-
BSI 14/30288142 DC:2014 Edition
BS EN 16716. Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods Published By…
-
BS EN ISO 16701:2015
Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under…
-
BS EN 16710-2:2016
Ergonomics methods – A methodology for work analysis to support design Published By Publication Date…
-
BS EN ISO 16701:2008
Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under…
-
BS EN 16714-2:2016
Non-destructive testing. Thermographic testing – Equipment Published By Publication Date Number of Pages BSI 2016…
-
BS EN 16712-4:2018
Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Portable foam equipment – High…
-
BS EN 16511:2023 – TC
Tracked Changes. Modular mechanical locked floor coverings (MMF). Specification, requirements and test method for multilayer…
-
BS EN 16712-2:2015
Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable foam equipment –…
-
BS EN 16712-1:2015
Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable foam equipment –…
-
BS EN 16713-2:2016
Domestic swimming pools. Water systems – Circulation systems. Requirements and test methods Published By Publication…
-
BS EN 16713-1:2016
Domestic swimming pools. Water systems – Filtration systems. Requirements and test methods Published By Publication…
-
BS ISO 10315:2013:2015 Edition
Cigarettes. Determination of nicotine in smoke condensates. Gas-chromatographic method Published By Publication Date Number of…
-
BS EN 16711-2:2015
Textiles. Determination of metal content – Determination of metals extracted by acidic artificial perspiration solution…
-
BS EN 16716:2017
Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods Published By Publication Date Number…
