BS EN 16392-2:2014
$86.31
Non-destructive testing. Characterisation and verification of ultrasonic phased array equipment – Probes
| Published By | Publication Date | Number of Pages |
| BSI | 2014 | 14 |
This European Standard covers linear phased array probes used for ultrasonic non-destructive testing in contact technique (with or without a wedge) or in immersion technique, with centre frequencies in the range 0,5 MHz – 10 MHz.
This European Standard specifies the characterisation tests that have to be done at the end of the fabrication of a phased array probe. It defines both methodology and acceptance criteria.
This document does not describe methods and acceptance criteria to characterise the performance of an ultrasonic phased array instrument or the performance of a combined system. These are described in prEN ISO 18563-1 and in prEN ISO 18563-3.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 4 | Contents Page |
| 5 | Foreword |
| 6 | 1 Scope 2 Normative references 3 Terms and definitions 4 General requirements for compliance |
| 7 | 5 Technical specification for phased array probes |
| 8 | Table 1 – Technical information to be given in the probe data sheet Table 2 – Optional technical information to be shown in the probe data sheet |
| 9 | 6 Test equipment 6.1 Electronic equipment 6.2 Tests block and other equipment 7 Performance tests for phased array probes 7.1 General |
| 10 | 7.2 Physical aspects 7.2.1 Method 7.2.2 Acceptance criterion 7.3 Frequency, bandwidth and pulse duration 7.3.1 General 7.3.2 Method 7.3.3 Acceptance criteria |
| 11 | 7.4 Relative pulse-echo sensitivity variation 7.4.1 General 7.4.2 Method 7.4.3 Acceptance criterion 7.5 Probe sensitivity 7.5.1 General 7.5.2 Method 7.5.3 Acceptance criterion |
| 12 | 7.6 Inter-element cross-talk 7.6.1 General 7.6.2 Method 7.6.3 Acceptance criterion |
