ASTM-A933 1995
$40.63
A933/A933M-95 Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
| Published By | Publication Date | Number of Pages |
| ASTM | 1995 | 5 |
ASTM A933/A933M-95
Historical Standard: Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
ASTM A933/A933M
Scope
1.1 This specification covers plain and deformed steel wire and plain and deformed steel welded wire fabric with protective vinyl (PVC, polyvinyl chloride, or polyvinyl chloride powder compound) coating. Class A is intended for use as reinforcement in concrete and Class B as reinforcement in earth.
1.2 Other thermoplastic organic coatings may be used provided they meet the requirements of this specification.
Note 1–The coating applicator is identified throughout this specification as the manufacturer.
1.3 Requirements for coatings are contained in Annex A1.
1.4 This specification is applicable for orders in either inch-pound units (as Specification A933) or in SI units [as Specification A933M].
1.5 The values stated in either inch-pound or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.
Keywords
coating requirements; concrete reinforcement; corrosion resistance; steel wire; vinyl coating; welded wire fabric
ICS Code
ICS Number Code n/a
DOI: 10.1520/A0933_A0933M-95
Related products
-
ICC IFC Commentary 2012
International Fire Code and Commentary Published By Publication Date Number of Pages ICC 2012 1343
-
ASTM-A985 2012(Redline)
A985/A985M-12a Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts (Redline) Published By…
-
ASTM-A983 1998
A983/A983M-98 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium…
-
ASTM-A733 1999
A733-99 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples…
-
ASTM-A931:1996 Edition
A931-96 Standard Test Method for Tension Testing of Wire Ropes and Strand Published By Publication…
-
ASTM-C933 1996
C933-96a Standard Specification for Welded Wire Lath Published By Publication Date Number of Pages ASTM…
-
ASTM-A963/A963M 1997
A963/A963M-97 Standard Specification for Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Published By…
-
IEEE 802.16 2009
IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Broadband Wireless…
-
ASTM-A903 1999
A903/A903M-99 Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Approved Draft) Published By…
-
ASTM-D6593 2004
D6593-04a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
CA BuildingCode 10 part2:2010 Edition
California Building Code – Title 24 Part 2 – (2 Volumes – Includes parts 8…
-
AISC M325 17AW 2017
Steel Construction Manual, 15th Ed. Published By Publication Date Number of Pages AISC 2017 2328
-
CA LA County BuildingCode BothVolumes 2011
County of Los Angeles Building Code (2 Volumes) Complete Code Published By Publication Date Number…
-
ASTM-D6593 2005
D6593-05 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation…
-
ASTM-D6593 2005
D6593-05a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation…
-
ASTM-F933 1994
F933-85(1994)e1 Guide for Evaluation of Oil Water Separation Systems for Spilled Oil Recovery Applications (Withdrawn…
-
ASME BPVC II D M 2019
ASME BPVC – II – D – M -2019 – BPVC Section II, Materials, Part…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
BICSI TDMM 15 v1 2024
BICSI Telecommunications Distribution Methods Manual (TDMM), 15th Edition Published By Publication Date Number of Pages…
-
IEEE 802.16-2009
IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Broadband Wireless…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
ASTM-A333 1994
A333/A333M-94 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service Published By Publication…
-
AR FirePreventionCode 3Volumes 2007
Arkansas Fire Prevention Code Rules – 3 Volumes Published By Publication Date Number of Pages…
-
FL Building 07 2007
Florida Building Code – Building Published By Publication Date Number of Pages FL 2007 1140
-
ASTM-A703 2012(Redline)
A703/A703M-12b Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts (Redline) Published By Publication…
-
ASME BPVC II B 2010
ASME BPVC – II – B -2010 BPVC Section II, Materials, Part B, Nonferrous Material…
-
ASTM-E1706:2005 Edition
E1706-05e1 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates Published…
-
ASTM-A953 1996
A953-96 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing Published By Publication…
-
ASTM-A938 1997
A938-97 Standard Test Method for Torsion Testing of Wire Published By Publication Date Number of…
-
ASTM-A939 1996
A939-96 Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings Published By…
-
ASTM-D4485 2009
D4485-09 Standard Specification for Performance of Engine Oils Published By Publication Date Number of Pages…
-
ASTM-A923 1998
A923-98 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels…
-
ASTM-A833 1996
A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers Published By…
-
ASTM-A932 1995
A932/A932M-95 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using…
-
AR ArkansasFirePreventionCode 3Vol 2012
Arkansas Fire Prevention Code, 3 Volumes Published By Publication Date Number of Pages AR 2012…
-
ASTM-A993 1998
A993-98 Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature…
-
BS ISO/IEC 14882:2020
Programming languages. C++ Published By Publication Date Number of Pages BSI 2020 1868
