BS EN 1366-12:2014
$167.15
Fire resistance tests for service installations – Non-mechanical fire barrier for ventilation ductwork
| Published By | Publication Date | Number of Pages |
| BSI | 2014 | 36 |
This part of EN 1366 specifies a method for determining the fire resistance of non-mechanical fire barriers installed in fire separating elements designed to withstand heat and the passage of smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363‑1 and EN 1366‑2 .
This European Standard is not suitable for testing non-mechanical fire barriers in suspended ceilings without modification.
This European Standard is not suitable for testing fire dampers, see EN 1366‑2 .
This European Standard is not suitable for testing such products as air transfer grilles, as the pressures and flows involved are different and may cause differing behaviour.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 4 | Contents Page |
| 6 | Foreword |
| 7 | Introduction |
| 8 | 1 Scope 2 Normative references 3 Terms and definitions |
| 9 | 4 Test equipment 4.1 General 4.2 Connecting duct 4.3 Volume flow measuring station 4.4 Condensing unit |
| 10 | 4.5 Gas temperature measuring devices 4.6 Exhaust fan system 5 Test conditions 6 Test specimen 6.1 Size 6.2 Number of tests 6.2.1 General |
| 11 | 6.2.2 Supporting construction 6.2.3 Method of installation in the supporting construction 6.2.4 Method of installation on to the supporting construction 6.2.5 Method of installation away from the supporting construction |
| 12 | 6.3 Design 6.3.1 General 6.3.2 Orientation to be tested 6.3.3 Non-mechanical fire barriers installed within a wall or floor opening 6.3.4 Non-mechanical fire barriers mounted on to the face of a wall or floor 6.3.5 Non-mechanical fire barriers mounted remote from a wall or floor 6.3.5.1 General 6.3.5.2 Non-mechanical fire barriers mounted inside the furnace 6.3.5.3 Non-mechanical fire barriers mounted outside the furnace |
| 13 | 7 Installation of test specimen 7.1 General 7.2 Supporting construction Table 1 — Standard floor constructions 7.3 Minimum separation |
| 14 | 8 Conditioning 8.1 General 8.2 Water-based sealing materials 9 Application of instrumentation 9.1 Thermocouples 9.1.1 Furnace thermocouples (plate thermometers) 9.1.2 Unexposed surface temperature 9.2 Furnace pressure 9.2.1 General 9.2.2 Pressure differential measurement, furnace and connecting duct |
| 15 | 10 Test procedure 10.1 Determination of leakage of connecting duct and measuring station 10.2 Fire test procedure |
| 16 | 11 Performance criteria |
| 17 | 12 Test report |
| 18 | 13 Field of direct application of test results 13.1 Size of non-mechanical fire barrier 13.2 Non-mechanical fire barriers installed within structural openings 13.3 Non-mechanical fire barriers installed onto the face of a wall or a floor 13.4 Non-mechanical fire barriers remote from a wall or floor |
| 19 | 13.5 Fire from above 13.6 Separation between non-mechanical fire barriers and between non-mechanical fire barriers and construction elements 13.7 Supporting constructions |
| 21 | Figure 1 — Example of general test arrangement |
| 22 | Figure 2 — Example of an alternative arrangement when testing non-mechanical fire barriers in floor |
| 23 | Figure 3 — Non-mechanical fire barrier mounted in standard supporting construction |
| 24 | Figure 4 — Non-mechanical fire barrier mounted onto face of supporting construction within the furnace |
| 25 | Figure 5 — Non-mechanical fire barrier mounted onto standard supporting construction outside the furnace |
| 26 | Figure 6 — Non-mechanical fire barrier mounted remote from the standard supporting construction and inside the furnace |
| 27 | Figure 7 — Non-mechanical fire barrier mounted remote from the standard supporting construction and outside the furnace |
| 28 | Figure 8 — Non-mechanical fire barrier mounted in an insulated duct |
| 29 | Figure 9 — Detail for the application of thermocouples TS and T1 on the supporting construction at discontinuities |
| 30 | Figure 10 — Minimum separation |
| 31 | Figure 11 — Non-mechanical fire barriers mounted in different horizontal planes |
| 32 | Annex A (normative) EOTA TR026 – Characterization, Aspects of Durability and Factory Production Control for Reactive Materials, Components and Products |
| 33 | Bibliography |
Related products
-
BS EN 1366-12:2014+A1:2019
Fire resistance tests for service installations – Non-mechanical fire barrier for ventilation ductwork Published By…
